Indicator reference
All the indicators of the JetScalp terminal chart on one page, grouped by what they measure. For each one — a sentence on what it is, the tutorial lesson that covers it, and the terminal page with its formula and parameters.
An indicator is a formula of past prices, volumes and trades; what follows from that is covered in the lesson What indicators measure. How to add an indicator to the chart — Indicator manager.
Averages and channels
MovingAverage
A moving average is a price level with part of the small fluctuations removed: simple, exponential, weighted, adaptive, and the Ehlers and Kalman filters.
- In the tutorial: Moving averages, Trend and pullbacks.
- Terminal: MovingAverage.
LinearRegression
A rolling linear regression: a straight line fitted to the last bars, with the indicator line following its end point; in a steady trend it has no lag, and the channel around it shows the price dispersion.
- In the tutorial: Trend and its strength.
- Terminal: LinearRegression.
BollingerBands
Bollinger Bands — an average ± a few standard deviations of prices; they widen both with volatility and in a steady trend.
- In the tutorial: Volatility and anomalies, Range trading.
- Terminal: BollingerBands.
KeltnerChannel
The Keltner Channel — an exponential average ± a few ATRs: the channel width comes from the average true range, not from the price dispersion.
- In the tutorial: Volatility and anomalies.
- Terminal: KeltnerChannel.
SuperTrend
A trend-following line several ATRs away from the bar’s midpoint: below the price in a rise, above it in a fall. It is used as a trailing stop and a direction filter.
- In the tutorial: Trend and its strength, Trend and pullbacks.
- Terminal: SuperTrend.
ParabolicSAR
Dots below the price in a rise and above it in a decline that catch up with the price at an accelerating pace; a reversal happens when the price crosses them.
- In the tutorial: Trend and its strength.
- Terminal: ParabolicSAR.
VWAP and day levels
VWAP
The volume-weighted average trade price since the start of the day (week, month), with standard deviation bands.
- In the tutorial: VWAP, Range trading.
- Terminal: VWAP.
AnchoredVwap
VWAP anchored not to the start of the day but to an event — a volume spike, a channel breakout or a confirmed swing; a swing anchor becomes known with a delay.
- In the tutorial: VWAP.
- Terminal: AnchoredVwap.
VwapDeviation
Where the close is relative to VWAP, in VWAP standard deviations, and what the VWAP slope is in the same units.
- In the tutorial: VWAP.
- Terminal: VwapDeviation.
MeanReversion
A model of reversion to VWAP: a regression of the bar’s deviation on the previous bar’s deviation; it gives the half-life of the deviation and the s-score.
- In the tutorial: VWAP.
- Terminal: MeanReversion.
SessionLevels
Levels of the trading day: opening range, initial balance, and the previous day’s high, low and close. For MOEX, set the day start to 7, 9 or 10 o’clock (When the day starts on MOEX).
- In the tutorial: Intraday levels.
- Terminal: SessionLevels.
NoiseArea
The noise area — the usual price move from the day’s open for each time of day; leaving it counts as a breakout.
- In the tutorial: Intraday levels.
- Terminal: NoiseArea.
HighLow
The high and low of the current day, week or month, their midpoint and the midpoint of the previous period.
- In the tutorial: Intraday levels.
- Terminal: HighLow.
Swings and reversals
ZigZag
A zigzag line through notable highs and lows. The last swing point keeps moving until the next reversal forms: on history ZigZag looks better than in real time.
- In the tutorial: What indicators measure.
- Terminal: ZigZag.
Fractals
Bill Williams’ fractals — marks of local highs and lows. A fractal appears only after the bars to its right have closed, that is, with a delay.
- In the tutorial: What indicators measure.
- Terminal: Fractals.
Trend and its strength
ADX
Trend strength regardless of direction; the +DI and −DI lines show which side is stronger.
- In the tutorial: Trend and its strength.
- Terminal: ADX.
EfficiencyRatio
Kaufman’s efficiency ratio: the price displacement over the period divided by the path traveled; 1 — no pullbacks, near 0 — standing still.
- In the tutorial: Market regimes, Anatomy of a strategy.
- Terminal: EfficiencyRatio.
CorrelationTrend
The correlation of the price with the bar number: +1 — the price rises almost in a straight line, −1 — it falls, near 0 — there is no linear dependence on time.
- In the tutorial: Trend and its strength, Market regimes.
- Terminal: CorrelationTrend.
KalmanTrend
The Kalman-filter price velocity divided by the standard error of the estimate: how confidently the price is moving in one direction.
- In the tutorial: Trend and its strength, Market regimes.
- Terminal: KalmanTrend.
NormalizedMomentum
Momentum in volatility units: three pairs of exponential averages of different lengths, comparable across instruments.
- In the tutorial: Oscillators.
- Terminal: NormalizedMomentum.
Oscillators
RSI
The share of smoothed gains in the sum of smoothed gains and losses of the price, from 0 to 100.
- In the tutorial: Oscillators.
- Terminal: RSI.
LaguerreRSI
Ehlers’ fast low-lag RSI, from 0 to 1, computed from the elements of a Laguerre filter.
- In the tutorial: Oscillators.
- Terminal: LaguerreRSI.
Stochastic
Where the bar closed relative to the high and low of the last bars, from 0 to 100.
- In the tutorial: Oscillators.
- Terminal: Stochastic.
FisherTransform
The price position within the range of the last bars, stretched by the Fisher transform so that extreme values stand out more.
- In the tutorial: Oscillators.
- Terminal: FisherTransform.
MACD
The difference between the fast and slow exponential averages of the price, and its smoothed version; the histogram is the distance between them.
- In the tutorial: Oscillators, Moving averages.
- Terminal: MACD.
TSI
The double-smoothed price change divided by the double-smoothed path traveled, from −100 to +100.
- In the tutorial: Oscillators.
- Terminal: TSI.
RoofingFilter
An Ehlers filter that keeps only the swings of the price — it removes both the trend and the fine noise; an oscillator around zero.
- In the tutorial: Oscillators.
- Terminal: RoofingFilter.
Volatility
ATR
Average true range: how far the price moves per bar on average, gaps included.
- In the tutorial: Volatility and anomalies.
- Terminal: ATR.
Volatility
Volatility estimates from the bar’s four prices — Parkinson, Garman–Klass, Rogers–Satchell, Yang–Zhang — in percent per bar; the percentile and ratio modes show compression and expansion.
- In the tutorial: Volatility and anomalies.
- Terminal: Volatility.
Squeeze
Carter’s squeeze: dots mark the bars on which the Bollinger Bands moved inside the Keltner Channel, and the histogram shows where the price is moving away from the middle of the range.
- In the tutorial: Volatility and anomalies.
- Terminal: Squeeze.
Regime and anomalies
Choppiness
The choppiness index: the sum of the bars’ true ranges relative to the range of the window, from 0 to 100; near 100 — a choppy market, near 0 — a steady move.
- In the tutorial: Market regimes.
- Terminal: Choppiness.
VarianceRatio
Lo and MacKinlay’s variance ratio: whether moves continue over a scale of several bars (above 1) or give way to reversion (below 1).
- In the tutorial: Market regimes.
- Terminal: VarianceRatio.
PermutationEntropy
Bandt and Pompe’s permutation entropy: how ordered the sequence of neighboring prices is; near 1 — like noise.
- In the tutorial: Market regimes.
- Terminal: PermutationEntropy.
RobustZScore
How unusual a bar is for the recent past — by price change, volume or range — measured with the median and the median absolute deviation.
- In the tutorial: Volatility and anomalies.
- Terminal: RobustZScore.
Cusum
The cumulative sum of bar returns in their standard deviations minus a tolerance: it marks a lasting shift rather than a single spike.
- In the tutorial: Volatility and anomalies.
- Terminal: Cusum.
RelativeVolume
The volume or range of a bar relative to the usual for the same time of day — the average over past days (RVOL).
- In the tutorial: Volatility and anomalies.
- Terminal: RelativeVolume.
Volume, delta and open interest
Volume
Volume, turnover or number of trades in each bar.
- In the tutorial: What volume shows.
- Terminal: Volume.
BidAsk
The volume of aggressive buys and of aggressive sells in each bar, separately.
- In the tutorial: What volume shows, Delta and CVD.
- Terminal: BidAsk.
Delta
Bar delta — the volume of aggressive buys minus the volume of aggressive sells.
- In the tutorial: Delta and CVD, Order flow signals.
- Terminal: Delta.
CumulativeDelta
Cumulative delta (CVD) since the start of the day, week, month or the whole history.
- In the tutorial: Delta and CVD.
- Terminal: CumulativeDelta.
LargeTradesDelta
Large trade delta: the volume of large buys minus large sells — per bar or accumulated since the start of the day, week, month or the whole history. The threshold and the joining of orders are the same as for the large trade circles in the footprint settings.
- In the tutorial: Large trades.
- Terminal: LargeTradesDelta; the threshold is in the Footprint section.
OpenInterest
Open interest and its change from bar to bar — how many futures positions are open.
- In the tutorial: Open interest.
- Terminal: OpenInterest.
OpenInterestQuadrant
The change in open interest per bar as columns, colored by the combination of the sign of the OI change and the sign of the delta: the aggressor is opening positions, closing them, or OI does not change noticeably. The labels describe the aggressor: every contract has two sides.
- In the tutorial: Open interest.
- Terminal: OpenInterestQuadrant.
Liquidity
Amihud
Amihud’s illiquidity measure: by how many percent a million of turnover (in the price currency) moves the price on average over the last bars.
- In the tutorial: Liquidity and market impact.
- Terminal: Amihud.
KyleLambda
Kyle’s λ — the sensitivity of a bar’s price to its delta, estimated over recent bars — and the absorption strength: how much less (absorption, orange columns) or more (vacuum, blue) than expected a bar with a large delta moved.
- In the tutorial: Liquidity and market impact, Absorption and exhaustion.
- Terminal: KyleLambda.
How to use indicators
- Indicators describe context: the direction and strength of the recent move, the price’s position in its range and relative to the participants’ average (VWAP), volume and how unusual it is for this time of day.
- ATR, RVOL and Kyle’s λ help with risk: they show how widely the price is moving now and how easily it can be pushed — the distance to the stop and the position size depend on this (see Risk and position size).
- Read signals together: a single sign is a reason to take a closer look; the decision is made together with the level, the market regime and order flow. Indicators of the same family repeat each other, so combine ones that measure different things (see What indicators measure).